By Erin Huffstetler | 04/22/2015 | 6 Comments
This post may contain affiliate links. View our disclosure.
Thrift stores are full of lamps that are just begging for a makeover.
I mean, take a look at this vintage lamp that I found at a thrift store a few months ago. I was immediately drawn to the color and the raised bamboo pattern. It just needed the right lampshade to bring it back to life.
So, I bought the lamp, and started looking for a lampshade, but I just wasn’t having any luck. New lampshades cost too much, and all the second-hand shades I came across were dated and dingy and just plain not my style.
But then it hit me: I could cover a lampshade with new fabric to make it my style. And that meant I just had to find a shade with a size and shape that suited my lamp. Much easier.
In fact, once I changed my search criteria, I immediately found this lampshade in my mother-in-law’s garage, which means it was not only the right shape and size, but also free. Bonus.
With my lampshade secured, I headed to my fabric stash to “shop” for fabric. And when I came across this piece of vintage bark cloth, I knew I had my winner. I bought it at the World’s Longest Yard Sale in 2013, and was saving it for the right project. This was it.
If you’ve never recovered a lampshade before, here’s a quick tutorial.
How to Recover a Lampshade
What You’ll Need:
What You Do:
Line your fabric up with the seam of your lampshade, and clip it in place with clothespins. Fold the edge of the fabric in to create a clean edge. Then, fold the top and the bottom of the fabric in, so that it lined up with the top and bottom of the shade.
Wrap the fabric around your lampshade, taking care to keep the fabric tight, and clip it in place. It helps to have an extra set of hands for this step.
Note: If your shade has a steep slope to it, it’ll take a pretty wide piece of fabric to cover your shade. Drum shades require a lot less fabric.
Once you’re happy with your coverage, cut off the excess fabric, leaving an inch of extra all the way around.
Glue the fabric down at the seam with craft glue, and allow it to dry. Then, fold the extra fabric in at the top and bottom of your shade to create a neat edge. Use clothespins to hold it in place while you’re working.
Glue the fabric down on one end of the shade, and allow it to dry. Then, flip it over, and glue down the other end. Allow the glue to dry. Then, finish the seam of your lampshade by folding in the end of the fabric, and gluing it down.
And that’s all there is to it. Your lampshade will look better than new …
and it’ll even have a clean, professional edge. Pretty spiffy.